Course description
Covers the 2024 edition of NFPA 70E, beginning with the purpose and scope stated in Article 90, the definitions in Article 100, and the employer and employee responsibilities in Article 105. Participants examine the elements of an electrical safety program under Sections 110.2 and 110.3, job safety planning and job briefings, training requirements for qualified and unqualified persons, the selection and use of test instruments under Section 110.6, and the priority of establishing an electrically safe work condition.
The course then addresses lockout/tagout under Article 120, including the distinction between simple and complex procedures in Section 120.5, the de-energization sequence in Section 120.6, verification of the absence of voltage, and the energized electrical work permit. Later lessons cover shock and arc flash risk assessment under Sections 130.4 and 130.5, approach and arc flash boundaries, arc-rated clothing and protective equipment, and safety-related maintenance for switchgear, panelboards, motor control centers, fuses, circuit breakers, and battery rooms.
Learning objectives
- Describe the elements of an electrical safety program required by Sections 110.2 and 110.3, and the job briefing requirements of Subdivision 110.3(I).
- Apply the lockout/tagout requirements of Article 120, including the de-energization sequence and verification of the absence of voltage under Subdivision 120.6(7).
- Determine shock approach boundaries and the arc flash boundary using Sections 130.4 and 130.7.
- Select arc-rated clothing and protective equipment under Subdivision 130.5(F) and Table 130.7(C)(15)(c), and locate the safety-related maintenance requirements in Articles 205 through 320.
Disclosure of proprietary interest. No instructor, subject-matter expert or content author involved in developing or delivering this course holds any financial or ownership interest in any product, instrument, device or material referenced in it, and none receives any royalty, profit share or other consideration from the promotion or endorsement of any product. This course does not endorse any commercial product or service.
Course Features
- Lectures 25
- Quizzes 25
- Duration 52 weeks
- Skill level All levels
- Language English
- Students 1
- Certificate Yes
- Assessments Self
- Format Audio + Text
- 1 Section
- 25 Lessons
- Electrical Safety - NFPA 70E 202450
- 1.1Understanding the Purpose and Scope of NFPA 70E 2024 (Article 90)
- 1.2Quiz – Understanding the Purpose and Scope of NFPA 70E 2024 (Article 90)1 Question
- 1.3Key Definitions for Electrical Safety (Article 100)
- 1.4Quiz – Key Definitions for Electrical Safety (Article 100)1 Question
- 1.5Employer and Employee Responsibilities (Article 105)
- 1.6Quiz – Employer and Employee Responsibilities (Article 105)1 Question
- 1.7Core Elements of the Electrical Safety Program (ESP) [Section 110.2 & Section 110.3]
- 1.8Quiz – Core Elements of the Electrical Safety Program (ESP)1 Question
- 1.9Job Safety Planning and Job Briefings [Subdivision 110.3(I)]
- 1.10Quiz – Job Safety Planning and Job Briefings1 Question
- 1.11Training Requirements for Qualified and Unqualified Persons [Subdivision 110.4(A)]
- 1.12Quiz – Training Requirements for Qualified and Unqualified Persons1 Question
- 1.13Safe Selection and Use of Test Instruments [Section 110.6]
- 1.14Quiz – Safe Selection and Use of Test Instruments1 Question
- 1.15The Priority of an Electrically Safe Work Condition [Subdivision 110.2(B)]
- 1.16Quiz – The Priority of an Electrically Safe Work Condition1 Question
- 1.17Principles of a Lockout/Tagout (LOTO) Program [Section 120.3]
- 1.18Quiz – Principles of a Lockout/Tagout (LOTO) Program1 Question
- 1.19Simple vs. Complex Lockout/Tagout Procedures [Section 120.5]
- 1.20Quiz – Simple vs. Complex Lockout/Tagout Procedures1 Question
- 1.21The Step-by-Step De-energization Process [Section 120.6]
- 1.22Quiz – The Step-by-Step De-energization Process1 Question
- 1.23Verifying the Absence of Voltage [Subdivision 120.6(7)]
- 1.24Quiz – Verifying the Absence of Voltage1 Question
- 1.25Justifying Energized Work and the Energized Electrical Work Permit (EEWP)
- 1.26Quiz – Justifying Energized Work and the Energized Electrical Work Permit (EEWP)1 Question
- 1.27Performing an Electric Shock Risk Assessment [Section 130.4]
- 1.28Quiz – Performing a Shock Risk Assessment1 Question
- 1.29Limited and Restricted Approach Boundaries [Subdivision 130.4(E)]
- 1.30Quiz – Limited and Restricted Approach Boundaries1 Question
- 1.31Performing an Arc Flash Risk Assessment [Section 130.5]
- 1.32Quiz – Performing an Arc Flash Risk Assessment1 Question
- 1.33Determining the Arc Flash Boundary [Section 130.7]
- 1.34Quiz – Determining the Arc Flash Boundary1 Question
- 1.35Methods for Selecting Arc Flash PPE [Subdivision 130.5(F)]
- 1.36Quiz – Methods for Selecting Arc Flash PPE1 Question
- 1.37Understanding Arc Flash PPE Categories [Table 130.7(C)(15)(c)]
- 1.38Quiz – Understanding Arc Flash PPE Categories1 Question
- 1.39Requirements for Arc-Rated Clothing and Underlayers [Subdivision 130.7(C)(9)(c)]
- 1.40Quiz – Requirements for Arc-Rated Clothing and Underlayers1 Question
- 1.41Head, Face, Hand, and Foot Protection [Table 130.7(C)(15)(c)]
- 1.42Quiz – Head, Face, Hand, and Foot Protection1 Question
- 1.43General Requirements for Safety-Related Maintenance [Article 205]
- 1.44Quiz – General Requirements for Safety-Related Maintenance1 Question
- 1.45Maintenance of Switchgear, Panelboards, and MCCs [Article 210]
- 1.46Quiz – Maintenance of Switchgear, Panelboards, and MCCs1 Question
- 1.47Maintenance of Fuses and Circuit Breakers [Article 225]
- 1.48Quiz – Maintenance of Fuses and Circuit Breakers1 Question
- 1.49Safety Practices for Batteries and Battery Rooms [Article 320]
- 1.50Quiz – Safety Practices for Batteries and Battery Rooms1 Question
