Online PDH Courses for Tennessee

Tennessee – NEC 2026 Code Changes (20 PDH)

🏆 Unlimited Certs 📱 Mobile 🕒 24/7 Access Audio + Text
$65.00
Buy Now

Tennessee – NEC 2023 Code Changes (20 PDH)

🏆 Unlimited Certs 📱 Mobile 🕒 24/7 Access Audio + Text
$65.00
Buy Now

Tennessee – NFPA 70E (4 PDH)

🏆 Unlimited Certs 📱 Mobile 🕒 24/7 Access Audio + Text
$20.00
Buy Now

PDH Requirement – Tennessee (Electrical Engineer)

The complete requirements and renewal steps are listed below

Tennessee PDH requirement for professional engineers. Engineers seeking renewal for the first time after initial registration must obtain twelve (12) hours of CE during the two (2) years immediately following initial registration; seven (7) hours must address health, safety, and welfare issues and technical competencies. Engineers seeking renewal for every two years thereafter must obtain twenty-four (24) hours of CE; thirteen (13) hours must address health, safety, and welfare issues and technical competencies. PDHs earned in excess of the required amount may not be carried over to a future renewal period. The board will not approve continuing education courses in advance. Records must be maintained for a period of four (4) years. See the board’s continuing education page and Tenn. Comp. R. & Regs. 0120-05.

Board: State Board of Examiners for Architects, Engineers, and Land Surveyors

  • Hours: 24 PDH per two-year renewal (12 at first renewal)
  • Health, Safety and Welfare and technical competency: at least 13 PDH
  • Carryover: none
  • Renewal: every two years
  • Records: keep for four years for audit

Frequently Asked Questions (FAQ)

A registered engineer seeking biennial renewal shall submit satisfactory evidence of having obtained twenty-four (24) PDHs the two (2) years immediately preceding application for renewal. At least thirteen (13) of the PDHs claimed shall address Health, Safety and Welfare issues and technical competency. As an alternative, a registered engineer may meet the requirement by obtaining twelve (12) PDHs per calendar year, at least seven (7) of which shall address Health, Safety and Welfare issues and technical competency. Source: Tenn. Comp. R. & Regs. 0120-05.

All certificates of registration issued to engineers are subject to biennial renewal (every two (2) years) (Rule 0120-01-.25). At your first renewal after initial registration, you need twelve (12) PDHs from the two (2) years immediately following initial registration, at least seven (7) of them on Health, Safety and Welfare issues and technical competency (0120-05).

No. PDHs earned in excess of the required amount may not be carried over to a future renewal period. Source: Tenn. Comp. R. & Regs. 0120-05.

The rule lists "Attendance at structured seminars, tutorials, short courses, correspondence courses, televised courses, Internet courses, or videotaped courses" as qualifying activities, and says PDHs may be acquired at any location. A PDH is a contact (clock) hour of not less than fifty (50) minutes of instruction or presentation. Every lesson in our courses is followed by a quiz, and you receive a certificate of completion when you pass. Source: Tenn. Comp. R. & Regs. 0120-05.

No. The board will not approve continuing education courses in advance. Source: board continuing education page.

No. At the time of renewal, you are not required to submit your continuing education records unless you are audited by the board (board renewal page). Records must be maintained for a period of four (4) years, and copies must be furnished to the board for audit verification purposes within thirty (30) days of the board's request (0120-05).

Two 20-PDH courses at $65 each (NEC 2026 Code Changes, NEC 2023 Code Changes) and the 4-PDH NFPA 70E course at $20.

Sample Certificate

Download instantly after completing your course.

Sample Certificate

Professional Development Hours for Electrical Engineers in Other States

Browse electrical engineer PDH courses across every state ExpertCE serves.